If you avoid the maintenance of your car for a long time, it will gradually show signs of wear and tread. You will observe dents and scratches on its body. If you are very late to respond, you will find the exterior of your vehicle in a miserable condition.
In this condition, you have to pay more when you visit a garage for Welding Service Worthing. Thus, it is better you maintain your car regularly to avoid major issues in the vehicle.
The same story is true for your car tyres. Tyres come with full strength but poor maintenance will promote wear and tear and they will show the signs like bulges, cracks or cuts on the sidewall. Tread wear is also a sign that indicates that your tyres are near retirement.
Proper maintenance of your car tyres is essential since only they contact the road surface directly. It means, your tyres link the road surface and your vehicle.
Your tyres would not perform on road at the same performance level. The following factors influence the performance level of the car tyres:
Load on the vehicle:
Your tyres carry the load of your vehicle. They are the only components that touch the road directly. Thus, it is natural that they will naturally feel more burden if you overload your vehicle. Thus, tyre makers make every tyre with loading capacity.
Improper air pressure:
Your user manual tells you about the correct air pressure in your tyres. Both over-inflation and under-inflation are not appropriate for the performance and health of your car tyres.
In both cases, your tyres would not touch the road properly. Due to the imperfect contact patch, they would not perform well and you will see a faster rate of wear and tear as well.
Speed:
Surely, you need speed to reach your destinations. But driving at high speeds for a long time will affect the mechanical condition of your tyres as well.
Friction and heat are two companions of speed. More friction and heat take place to degrade the rubber material of your tyres
Wheel alignment and wheel balancing:
If the suspension components are set according to the rules and regulations of your manufacturers, it means your wheels are in proper alignment. Whenever you observe that your wheels are pulling to one side, check the wheel alignment with the help of a mechanic. Similarly, your wheels should not have heavy spots to experience improper wheel balancing.
If you ignore these aspects for a long time, your tyres will wear out rapidly.
Road conditions:
Broken and rough roads will damage your tyres more in the comparison with smooth road conditions.
Weather conditions:
Both hot and cold weather affect the health of your car tyres. The temperature of roads will degrade the rubber material and substances like snow and water also play their role to affect the physical strength of the car tyres.
Driving habits:
Driving at high speed, sharp turns, harsh braking and unsmooth driving are some bad habits that are responsible to damage your car tyres as well.
Because of these factors, your car tyres will face the following problems:
Bulges and cracks on the sidewall:
Bulges take place on the sidewall when the internal structure of your tyres is seriously damaged. Cracks in the sidewall area show that your tyres are ageing and you should stop using them.
Treadwear:
Tread wear is also a common issue that your tyres face due to ageing, road conditions, weather conditions, and poor maintenance. You must change your tyres when your tyres are at the limit of 1.6mm tread depth.
Impact damage:
Hard objects like kerbs or bumps may damage your tyres if you hit your vehicle with these objects. Moreover, sharp objects like iron nails or pieces of glass may pierce the body of your car tyres at any time.
To avoid these problems, car drivers need to consider the following tips:
Check the air pressure in your tyres and maintain the correct air pressure. Check your user manual to know more about the correct air pressure in your rear and front tyres.
Inspect your tyres visually for signs like bulging, cracks, cuts, and tread wear. Whenever you observe these signs, change your tyres as soon as possible.
Rotate your tyres regularly to bring the rate of tread wear to an equal level. However, you would not be able to change the sides of your tyres if they have a directional tread pattern.
Do not repair your tyres again and again if they have several punctured areas near each other. These spots of the tyre’s body are weak. Therefore, repairing these areas may invite blowouts.
Maintain proper air pressure in your tyres since wrong air pressure is the root cause of several problems.
Do not overload your vehicle and do not cross the speed limit as well to keep your Car Tyres Worthing safe for a long time.
