Mr. Journo
Home Technology Helpful Ways to Maintain the Settings of the Juplink Range Extender
Technology

Helpful Ways to Maintain the Settings of the Juplink Range Extender

by james nickola - 30 Sep 2021, Thursday 212 Views Like (0)
Helpful Ways to Maintain the Settings of the Juplink Range Extender

Helpful Ways to Maintain the Settings of the Juplink Range Extender

The Juplink Range Extender can extend the networking coverage range and can be connected to approximately twenty devices at the same time. Along with connecting to the devices, you can stream your favorite movies or shows, video-call with your friends, and play video games with them. Therefore it also supports a dual-band wireless connection with 2.4 GHz or 5 GHz of range. Moreover, you can use the extender as a repeater as well and it does not diminish the speed of your network but expand it so that it can reach upto every corner of your apartment. 


However, the Juplink wireless extender acts as a multi-mode application in which it can be your access point, universal repeater, and a wifi router mode. Along with that, the Juplink wifi extender setup provides you easy and simple access to manage the settings of the extender. You can use the web browser or any other platform which you find intuitive so that you can proceed with the setup of the range extender. 

Maintain the Network settings of the Juplink Range Extender

Before you start changing the settings of the extender, you have to perform the setup of the range extender device in an appropriate way. To perform the setup of the range extender you need its major components that are obviously a wireless range extender and a quick start guide and then you are ready to do the setup of the device. You can also take help from the manual guide to perform this function in a simple way. 

Ways To do the Setup of the Juplink wifi extender

Make sure that you have found an appropriate location where you can place the extender and get a smooth and expeditious speed of wifi connection. 

You can use the wired connection in which an Ethernet cable is required. 

If you use the wireless connection then it requires the network SSID name that is printed on the label of the device. Therefore, click on the network icon and then go to the settings of the wifi connection and ten to the SSID network name and then join to the network connection. 

If you use the WPS button setup then press it for a few seconds and then it is ready to access the connection of the device.

Easily log in to the Juplink wifi Range extender

After the setup now it’s time to log into the device. If you select the web browser method then you have to use the client device. In which, open the safe internet zone and then enter the router.jupink.com or use the IP address 192.168.0.2 in the search bar. Afterward, you are on the login page where you need to enter the username admin and the default password admin into the black fields. Hence, click log in.

Manage the Settings of the Juplink Range Extender

After the login, you can now change the settings of the device. You can make various changes according to your comfort zone. If you want to change the username then you can also change the username and the wifi password by visiting the settings of the range extender. After the log in tap on the advanced settings of the Juplink web page and then choose the management and then click on the password.  Therefore, change into the username and the wifi password and tap on the save and apply button to save all the managed settings of the device.

Reload or save the settings 

In this article, you can save or reload the current settings that you saved previously. You can do the reset operation to configure the settings into the factory default. After the login, tap on the advanced settings and then select the management page, and then click on the save or reload settings button.

Settings of the Time Zone 

You need to maintain the time settings so that you can connect to the server of the internet connection. There are two ways from which you can set the time zone according to your local time. Either you copy the time from the computer in which it is applicable on the windows device only or you can enable the client update. In the Client update, go to the select box and then select a stable NTP server from the drop list or you can choose manually to enter the NTP server of the device.

Settings of the System Log

In the system log settings, you can remotely manage or view the settings of the system log. To enable the system log, go to the advanced section and then choose the management section and then click on the system log. Tap on the enable log and then enter the log which you want to record. Also, you need to enter the IP address so that you can enable the system to log in remotely.