To download, and install Canon printer setup on your device, go to ij. start. canon. Visit Canon’s official website to learn how to install the Canon printer drivers and software.
In this guide, we’ll help you through these steps to get your first printed copy using your Canon printer. You can find these instructions at ij.start.canon as well.
1- Take the Canon printer out of its package.
2- Next, look for the manual to ensure you haven’t overlooked anything important.
3- Now, click the power button to turn it on.
4- Place a piece of paper in the paper tray.
5- At this point, the printer should be turned on.
6- Place the cartridges and sheets of paper in the input and output trays, respectively.
7- The printer has now been turned on and is ready to use.
8- Turn on your printer and follow the on-screen commands.
9- Decide on a preferred language.
10- The printer first prints a test print to configure the grids. This means the printer decides where to print on the sheet of paper.
11- Check to see if the print fulfills your expectations. If not, go into the settings and reset the grids.
12- Set the PCB on to fit the scanner.
13- Afterward, run the scanning process.
14- Then, at the bottom of the column, click the Canon support link ij. start. canon to download the necessary software.
15- In the search bar, type the name of your printer’s product, or select the right printer family from the drop-down menu under ‘select product.’
16- The model and the serial number of your printer can be found on the front, on the box, and in the manual.
17- Select the operating system you want to install the printer on, like Windows 10 or macOS, under Drivers.
18- Click on Download.
19- Now you can start using the software.
20- Choose whether you wish to connect to the printer via WiFi or a printer wire.
21- The software is easy to install and only takes a few minutes.
22- Go to your printer’s Settings, then Device Settings, and finally Wireless LAN Settings.
23- From the drop-down option, choose Default Settings or Setup without cable.
24- Give your network a unique name. SSID stands for Service Set Identifier.
25- Then, Enter the password for your WiFi network.
26- Click the OK button.
27- Print the first page and grab a printout from the printer.
28- The printer is now configured. Make your first print to get started.
To set up the connection using USB wire, simply follow the steps outlined below:
1- USB wire ports are recognized for being used to plug USB or Ethernet cables into your device or network router.
2- One built-in Ethernet port connects most devices to a connected network.
3- USB and Ethernet cables are not the same as the ones you use to connect your device.
4- Connect the USB wire to two ports on your printer and one on your device.
5- Now, install the ij.start.canon setup by following the on-screen steps.
You’ll need drivers and software on your device to run your printer and receive the prints you need for your production. The printing command is sent to the printer by the drivers, who allow printing. Let’s get started.
1- First, Turn on both the printer and your device.
2- Now go to ij.start.canon in your browser.
3- Then, in the Model Number Search bar, type in your model number.
4- Then press the “Go” button.
5- To complete the setup, click Download and follow the on-screen steps.
6- You can find it in the download folder once the procedure is completed.
7- You must install the Canon Printer drivers, but first, ensure that the printer is connected to the device.
8- Next, run the setup after opening the setup file in the Downloads folder.
9- Afterward, select the Install option and follow the on-screen directions to complete the installation.
To install a Canon printer driver, follow the guidelines given here.
1- Download printer drivers by going to ij.start.canon and searching for the model number of your printer.
2- Now, choose your connection type, choose your connection type by double-clicking the Canon icon.
3- Then, turn your printer on by clicking the power button to turn on your printer.
4- Afterward, Press the WIFI alarm button to turn on the printer’s wireless connection.
5- Now, to complete the installation, click the “I agree” button after reading the Terms and Agree.
6- Finally, to finish the installation, click the Finish button.
Canon IJ printer driver (also known as a printer driver) is a piece of software installed on your device to allow you to print data from this machine. The printer driver transforms the print data generated by your application software into data that your printer understands and sends to the printer. To download Canon printer drivers, go to http://ij.start.cannon